Skip to main content

v1.3.1

Minor Versionm

by Adalyn Ordono

Introduction

In this guide you will learn how to:

  • Connect Palette to the Internet using Wi-Fi on Palette 3, WiFi and ethernet on Palette 3 Pro.
  • Toggle Wi-Fi on/off, disconnect and forget Wi-Fi networks.
  • Connect Palette to your Canvas account.
  1. During the initial setup, after accepting the Terms of Service you can connect to the internet. Connecting Palette 3 to the Internet will allow for firmware updates to be completed wirelessly, and will make printer profile presets available. Additionally, it will allow you to connect Palette to your Canvas account.
    • During the initial setup, after accepting the Terms of Service you can connect to the internet.

    • Connecting Palette 3 to the Internet will allow for firmware updates to be completed wirelessly, and will make printer profile presets available. Additionally, it will allow you to connect Palette to your Canvas account.

    • There are two options for connecting to the internet: Wi-Fi (Palette 3, Palette 3 Pro) or Ethernet (Palette 3 Pro only).

    • If you skip connecting to the Internet during the initial setup, you can always connect from the side menu later.

  2. To connect to Wi-Fi: Tap Wi-Fi and choose an existing network from the list, or manually add a network using an SSID and a password. In case there are issues connecting to Wi-Fi during this initial setup, this can be skipped and entered again from the side menu. Wi-Fi options from the side menu include toggling the Wi-Fi on/off,  disconnecting and forgetting networks if needed.
    • To connect to Wi-Fi: Tap Wi-Fi and choose an existing network from the list, or manually add a network using an SSID and a password.

    • In case there are issues connecting to Wi-Fi during this initial setup, this can be skipped and entered again from the side menu.

    • Wi-Fi options from the side menu include toggling the Wi-Fi on/off, disconnecting and forgetting networks if needed.

  3. Ethernet connection is available on Palette 3 Pro.
    • Ethernet connection is available on Palette 3 Pro.

    • To Connect to Ethernet: Click Ethernet to connect using an ethernet cable, and insert the cable into the port.

    • Once an ethernet cable is plugged in, Palette 3 will automatically proceed with the Ethernet connection over Wi-Fi.

    • If you skip this step during the initial setup, an Ethernet connection can be established at anytime by plugging in the cable.

  4. Once your Palette is connected to the Internet, you will be able to login to your Canvas account. A Canvas account can be created here.  Connecting Palette to your Canvas account (with Internet) will allow for prints to be sent and monitored from Canvas.
    • Once your Palette is connected to the Internet, you will be able to login to your Canvas account.

    • A Canvas account can be created here. Connecting Palette to your Canvas account (with Internet) will allow for prints to be sent and monitored from Canvas.

    • If you skip connecting to Canvas during the initial setup, you can always connect your Canvas account from the side menu later.

    • Click Link to Canvas. This will provide you with an activation code to connect Palette to Canvas

  5. An activation code is generated on Palette. Enter the activation code beside Online devices. Login to Canvas on another computer and visit:  canvas3d.io/connect. This is also available from the Main menu > Devices > Connect device. Palette should now be connected to your Canvas account!
    • An activation code is generated on Palette.

    • Enter the activation code beside Online devices. Login to Canvas on another computer and visit: canvas3d.io/connect. This is also available from the Main menu > Devices > Connect device.

    • Palette should now be connected to your Canvas account!

Conclusion

If you have any additional questions, please send us a message at support@mosaicmfg.com.

13 other people completed this guide.

Mosaic Support

Member since: 04/02/2020

155 Guides authored

8 Comments

I have my Palette 3 Pro and it was working well. However, nothing has changed in my setup, and now Canvas cannot send slices directly to Palette 3 Pro. I'm able to connect and use the controls (move in the x/y/z, view camera, start print that's already on memory), but on any existing or new projects, when I click on Send to Palette, I get a red popup over the button saying "Device Error: 500".

I know 500 code means there's a server connection error, but there does seem to be a connection if I can control the printer and palette from canvas3d.io website. Please let me know if there's anything else you need to help me with this issue. Thank you!

Justin - Reply

Edit: My mistake, I can properly send previously working projects to the palette, but not any new projects.

Things I have tried:

Disconnecting and reconnecting Palette to Canvas Account

Clearing Cache and Cookies

Using a different web browser

Using a different wifi

Justin -

Hi, please advise with 'Unable to connect to Canvas and retrieve activation code' in our Mosaic Palette 3 Pro.

Abdul Razak Abdul Kadir - Reply

Hi Abdul, is your P3 connected to the same network as your device that is running Canvas?

Jonny Yeu -

Hi

i have issue to connect to Wifi, it can not show any network at all....

i have tried to troggle wifi on/off and resett my palette 3 pro butt nothing at all...

i can connect to eternet and there is no problem i can se it on canvas butt not true Wifi ???

my firmware is 22.08.11.0 and it has worked beafore...

i had it turned off when i dont use it...

Christer Persson - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 22

Past 30 Days: 87

All Time: 4,414

Contact Mosaic Support Team

© 2023 Mosaic Manufacturing Ltd.