What should I do when my splices are too thick (up to 1,9mm - most of the time 1.85mm). Your recomondation is? “opposite is true” - > so… -> Increase the heat, decrease cooling? THX
I have got an Error 130 - the Filament slipped out. :-(
Feature request:
If an Error 130 occur - bring the print head to a safe position - leave the bed temp on level.
At least for 30-60 minutes. The user could fix the filament and press a button on the screen - resume. Heat up the print head - let the user clear the nozzle. And resume the print!
Hi, I dowloaded the Download alternate release alt-21.12.07.0 (For Prusa Mini and Prusa Mk3 v3.10.x) - copied to an usb-stick an start the update process. After 2-3 hours nothing happens. — The scree shows rotating arrow “Applying Update…”
Is it possible to recover the print from an Error? Example a Timeout Error like 130/131 - if I put the Filament back into the postion? That the print could resume.
Hi! When do you add support to the Prusa mk4?
Please provide some examples with pictures.
What should I do when my splices are too thick (up to 1,9mm - most of the time 1.85mm). Your recomondation is? “opposite is true” - > so… -> Increase the heat, decrease cooling? THX
I have got an Error 130 - the Filament slipped out. :-(
Feature request:
If an Error 130 occur - bring the print head to a safe position - leave the bed temp on level.
At least for 30-60 minutes. The user could fix the filament and press a button on the screen - resume. Heat up the print head - let the user clear the nozzle. And resume the print!
Hi, I dowloaded the Download alternate release alt-21.12.07.0 (For Prusa Mini and Prusa Mk3 v3.10.x) - copied to an usb-stick an start the update process. After 2-3 hours nothing happens. — The scree shows rotating arrow “Applying Update…”
Is it possible to recover the print from an Error? Example a Timeout Error like 130/131 - if I put the Filament back into the postion? That the print could resume.