I received the mainboard yesterday and put it in, turned on the Palette today and seems to be working fine with no issues! Now I can work on getting it calibrated. Thank you for your responses and helping me resolved the issues!
I have reflashed the firmware multiple times now. Still having the same issue. Each time I turn it on it may or may not read from SD files. Flashing, factory resetting has no impact on the issue. Yesterday for example I turned it on and it read the files, i decided i would try the calibration keychain again. It made it to the second layer, then the palette appeared to have frozen. The extruder pulled filament until the palette hit the buffer indicator, the light came on but it never fed more filament and provided the Buffer error. The filament stripped on the printers extruder gear because palette would not feed any more filament. After this failure, i power cycled the palette, and when i turned it back on it wouldnt read from SD again. I tried a dozen times during the day and nothing. In the evneing I turned it on and to my surprise it read the SD card, so i decided to print. I selected the print - it froze on initializing, a couple hours later i tried again and the print worked. Today - nothing
I tried several formats but am formatted as fat32 now and have better luck with that. But I literally had it working, finished a print, then went to start another, and no files found. Nothing else changed in the unit. I also find the screen, or system freezes up or has the buttons disabled regularly. It's hit or miss when I turn it on if it will read files. I can power cycle it over and over then one time it randomly works, next time it may not.
I followed all of the steps, and did a factory reset. My P2S Pro read the same file from the same card a few days ago and now it will not. I have formatted the card, resliced the files, tested the card on other devices (reads fine). The Palette can tell when no card is present, then it says no files found when it is. I re updated the firmware, dont know what other options I have. This is cool but frustrating, works one day, no changes, doesnt work the next?
I had this issue, one time it randomly worked, now it won't read the card again. I have followed all of the steps listed and it still does not work. Any other ideas. I have tried multiple cards, have re-updated the firmware, can view the card contents on other devices, have loaded only files I have already worked on to the card too ensure no corruption and have reformatted the SD cards. I love the palette when it works but these SD issues are frustrating
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
I received the mainboard yesterday and put it in, turned on the Palette today and seems to be working fine with no issues! Now I can work on getting it calibrated. Thank you for your responses and helping me resolved the issues!
I have reflashed the firmware multiple times now. Still having the same issue. Each time I turn it on it may or may not read from SD files. Flashing, factory resetting has no impact on the issue. Yesterday for example I turned it on and it read the files, i decided i would try the calibration keychain again. It made it to the second layer, then the palette appeared to have frozen. The extruder pulled filament until the palette hit the buffer indicator, the light came on but it never fed more filament and provided the Buffer error. The filament stripped on the printers extruder gear because palette would not feed any more filament. After this failure, i power cycled the palette, and when i turned it back on it wouldnt read from SD again. I tried a dozen times during the day and nothing. In the evneing I turned it on and to my surprise it read the SD card, so i decided to print. I selected the print - it froze on initializing, a couple hours later i tried again and the print worked. Today - nothing
I tried several formats but am formatted as fat32 now and have better luck with that. But I literally had it working, finished a print, then went to start another, and no files found. Nothing else changed in the unit. I also find the screen, or system freezes up or has the buttons disabled regularly. It's hit or miss when I turn it on if it will read files. I can power cycle it over and over then one time it randomly works, next time it may not.
I followed all of the steps, and did a factory reset. My P2S Pro read the same file from the same card a few days ago and now it will not. I have formatted the card, resliced the files, tested the card on other devices (reads fine). The Palette can tell when no card is present, then it says no files found when it is. I re updated the firmware, dont know what other options I have. This is cool but frustrating, works one day, no changes, doesnt work the next?
I had this issue, one time it randomly worked, now it won't read the card again. I have followed all of the steps listed and it still does not work. Any other ideas. I have tried multiple cards, have re-updated the firmware, can view the card contents on other devices, have loaded only files I have already worked on to the card too ensure no corruption and have reformatted the SD cards. I love the palette when it works but these SD issues are frustrating