v0.10.0 Release, April 17th 2024
- Improved UI for multi-color printing
- Improved UI for single color printing
- Added advanced network information, accessible through Element screen
- Improved firmware error logging
- Improved handling of errors during printing
- Fixed issue where filament was oozing from Print Head when pausing print
- Improved pausing / resuming process, fixing issues where print quality was affected
- Fixed issue where Print Head stops on top of the print resulting in poor print quality
v0.9.0 Release, April 2nd 2024
- Element now supports individual Material Pod updates outside of the normal updater flow.
- Material Pods can be independently updated via Home > Materials > Details.
- A maximum of 2 simultaneous Material Pod updates are currently supported.
- Home screen layout has been readjusted to provide a more intuitive user flow by swapping the Materials and Settings icons.
- Fixed a UI bug where the temperature screen icons would shift on the page as the temperature changed.
- Fixed a bug that prevented 3rd Party Tag Initialization from working properly.
- Fixed various UI bugs on the print screen.
v0.8.0 Release, March 21st 2024
Common Changes
- Multi-Color Beta Feature Release
- Multi-Color support has now been enabled on all Array and Element devices.
- The UI while printing will shift between printing, pausing, and preparing screens while filament change is occurring; this is normal and will be polished in a future release.
- Note: Recommendation is to start with 2 colors and less than 100 transitions.
- Filament production length has now been tuned to waste less filament while printing a long piece of filament.
- This should reduce the amount of time densifying at the end of a print and result in less filament wasted.
- Clearing Filament Path and Cutting control screens have now changed to more clearly indicate when the job has completed.
- Changes have also been made to prevent a user from accidentally performing the same action again while the current actions is still being performed.
- Fixed a bug that prevented prints from starting due to an error while attempting to clear the filament path.
- Improved UI reliablility on device startup.
Element
- Fixed a bug that formatted error messages incorrectly, resulting in large text font for body text.
- Text should now be in proper font size and should be scrollable when the text body exceeds the size of the screen.
- Fixed a bug that caused the progress bar during a print to be incorrectly colored in various states.
v0.7.0 Release, March 4th 2024
Common Changes
- Updated the design of binary toggles
Element
- Fixed a bug where Element would occasionally display Material Pod's as 0-indexed
- Removed Restart button, and only support Power Off
- Added Printhead cooling fan control
v0.6.0 Release, February 21st 2024
Common Changes
- Added errors when attempting to print with an unsupported DAF version
- Fixed a bug where Offline users would see out of date files in the file viewer
Element
- Improved the UI for unloading a Material Pod
- Display advanced Material Pod details across all Material Pod screens
- Added more granular progress to Firmware Updating
- Improved error messages when Element is unable to automatically clear the filament path
- Display an error when an active Material Pod is disconnected during a print
- Improved Material Pod feeding reliability while printing
v0.5.7 Release, January 23rd 2024
Element
- Improved microcontroller firmware reliability with green/blue firmware binaries
- Improved how the chamber is preheated before starting prints, removed Marlin's bed timeout of 20 minutes
- Fixed the reliability of Material Pod RFID reading for 1st and 3rd Party Spools
- Element Desktop now uses the power button
- Fixed a bug where offline Elements would allow the user to attempt an OTA firmware update
- Fixed a bug where Element would fail to start a print if the sensor values of the material pod were undefined
v0.5.6 Release, January 16th 2024
General Changes
- Improved the reliability of HostService dependency installation to be fully offline
v0.5.5 Release, January 8th 2024
General Changes
- Fixed a bug with network reporting where the IP address would also contain mac address information
Element
- Fixed a bug where Element would not accurately display its network status
- Updated the Wi-Fi connection flow to properly display connection errors, and fixed a bug where the connect button would be partially off the screen
- Updated the Print Head icon in the top bar
- Display 3rd party filament information in the materials portion of the expanded top bar
- Moved the ethernet and Wi-Fi information status icons when expanded
- Reduced the time it takes for Element to shut down
- Fixed a bug where Element would crash with invalid gcode commands
v0.5.4 Release
General Changes
- Sort files by date modified (most recent) when displaying them to the user
Element
- Fixed a bug where Element would not show the second updating screen, if the update was started through onboarding
- Fixed a bug in the uninstall printhead workflow, where uninstalling the printhead before the device expected would put it in a frozen state
- Unloading a material pod now drives forward after retracting, to ensure the outgoing filament switch is triggered. A material pod now requires both filament switches to be triggered to be considered ‘loaded’
- Fixed a bug where element would show a black screen when it failed to update firmware
- Display 3rd part filament icons when viewing the material pods in ‘list view’
v0.5.3 Release
General Changes
- Changed how firmware bundles are downloaded to use file streams
- Improved how old firmware bundles are purged using docker prune
Element
- Added support for setting the Element type in eeprom during device provisioning
- Fixed a bug where Element backend would crash if a Material Pod was unplugged during a Material Pod firmware update
- Added third party material support
v0.5.2 - November 28, 2023
- Fixed a bug where Element would hang trying to clear the filament path
- Fixed a bug where Element would crash if a print was cancelled while paused
- Use new Marlin acceleration values for O1 Elements
- Fixed a bug where Element would fail to load the extruder, even if it made the correct amount of filament
- Fixed a bug where the feed rate was hardcoded, and didn’t use the specified densifier parameter while purging
One Comment
Is there a page that we can download the firmware updates from ?
Will Cipkar - Reply