Tools
Parts
No parts specified.
-
-
Use a lithium grease or similar synthetic lubricant.
-
Using a syringe or eyedropper tool, apply a small amount of lubricant inside the small eyehole of one linear block along the X axis (Printhead rail), and two linear blocks along the Y axes on the left and right side of the printer.
-
Moving the printhead along the X and Y axes will help spread the lubricant.
-
Full instructions for lubricating linear guideways and ball screws can be found here.
-
-
-
From inside the printer chamber's left and right sides, apply lubricant into the small eyehole on the ball screw assembly. Move bed up and down to distribute lubricant.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
